AUTONET TV

A Real "Pane" (Window Maintenance and Repair)

It's pretty frustrating when your driver's window won't work.  You can't get your food at the drive-thru without opening the door, have a tough time using the ATM from your vehicle, can't have that fresh breeze blowing through your hair as you listen to your favorite road tunes.

Plus, there's a safety factor.  Your windows provide an escape route in case you need to get out and the doors won't work.  Let's take a look at what's going on when your window won't operate.

Most vehicles these days have power windows.  They have an electric motor in each power window and sometimes those fail.  They often give you a warning that they're on their last legs by making a noise or hesitating, so if you get a sign like that, have a technician check it out. Loss of power can also be due to a blown fuse, a bad switch or faulty wiring.

All windows have something called a regulator that moves the glass up and down.  They have a lot of moving parts in them which can break, become bent, rust or get out of alignment. The glass moves along a window track guide.  Sometimes if the glass gets out of the track, it won't move up and down the way it's designed to do.

When you take your vehicle over to a repair facility, a technician can pinpoint the cause of your malfunctioning window.  Often it involves having to remove the door panel to gain access to the components inside.  But when everything's working right, you'll be able to throw that annoying inconvenience right out the window.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net

Battery Replacement at Franklin Auto Service in Franklin

Hello, welcome to Franklin Auto Service. Today's focus is batteries. It seems like everything in Franklin runs on batteries. Of course, the batteries we're most concerned with here at Franklin Auto Service are those in our customer's vehicles. Just like the batteries in our smoke detectors or TV remote, they wear out and need to be replaced . This can be thought of as the power output used to start a cold vehicle engine. The number of cold cranking amps you need depends on your vehicle and where you live in MI, specifically how cold it is. (Many Franklin drivers have first-hand experience trying to start their car on a cold winter morning.) The two factors are that the colder your vehicle's engine is, the more power it takes to turn the engine over to get it started. It has all that cold, sluggish oil to contend with.

The other factor is that the chemical reaction in the battery that creates electrical energy is less efficient when the temperature dips. Let's say it's 80 degrees Fahrenheit (27 degrees C) in Franklin. At that temperature, 100% of the battery's power is available. At freezing, only 65% of battery power is available, but it requires 155% as much power to start the engine as it did at 80 degrees F (27 degrees C).

As you can see, the colder it gets, more power is needed, but the available power drops.

So if you live where it's cold in MI, you need a battery with more cold cranking amps than you do where it's moderate or hot. The battery that originally came with your vehicle was based on averages. At Franklin Auto Service, we like to remind Franklin drivers that they should always get at least as many cold cranking amps as their vehicle manufacturer recommends but may want to upgrade if they live where it gets real cold.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net

Don't Do It Yourself (Perils of DIY Vehicle Repair)

Your vehicle is a complicated machine, and yes, it would be nice if you could take care of all of its problems yourself.  There was a time when vehicles were simpler and it wasn't too hard for a weekend mechanic to replace brakes, adjust a carburetor or perform a tune-up.  But vehicles are far more complicated these days, with traction and stability control, anti-lock brakes, air bags and fuel injection just a small sample of the new technologies. 

Like a lot of things these days, technology changes in leaps and bounds.  Anyone who repairs vehicles has to stay up on the latest computers, sensors, suspensions, steering, electronics, hydraulics and more.  Many power steering, braking and heating and air conditioning systems that used to be mechanical are now being replaced by electronic systems.  Computers are an integral part of  much of the latest automotive technology, something you didn't see a lot of until as recently as the 1990s.

Today's most highly-trained technicians are able to keep up with how to perform the latest repairs and service by continuing education about their craft.  When once an auto repairman could do fine with a lift and a good set of tools, now specialized electronic analysis equipment and tools are must-haves when it comes to vehicle repair.

Because of how fast technology changes, access to the latest repair databases and manuals is also important.  Manufacturers require certain service procedures to be performed precisely, and any other way can leave a vehicle compromised when it comes to performance and safety. 

Your vehicle is capable of traveling at high speeds on challenging surfaces with ever-increasing traffic issues and unpredictable obstacles.  You need your vehicle to be working up to its engineered potential.  That's why you should leave repairs and service to professionals.  They work on vehicles every day, and years of experience with hundreds of repairs equip them to deal with the unexpected as well as the routine. 

When you develop a trusting relationship with a reputable service facility, you can have confidence that the maintenance, service and repairs are being done by people who know what they're doing.  Your safety and your vehicle's performance and reliability are well worth it.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net

It's Brake Time (Brake Calipers)

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around. 

A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads.

Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since they have fewer parts.

The other type is called a fixed caliper.  They use pistons on both sides of the disc, sometimes several.  They are often used in more high-performance or heavy-duty vehicles.

Calipers can have rubber seals to keep out dirt, debris and moisture, but when that rubber wears out, sometimes the calipers can get contaminated.  They can stick or start leaking; they can even rust.  Then your caliper can get stuck applying that "squeeze" when you are not pressing on the brake pedal.  Or they can get stuck in the other position, not applying stopping power when you press the pedal.

When this happens, it's not unusual to feel your vehicle pull to one side when you brake.  You might notice a burning smell from the constant friction if the caliper is stuck on, plus you may feel the heat from the wheel after you park and get out of your vehicle.  Sometimes you'll hear a high-pitched sound or clunk if your calipers are binding up. 

That's your cue to have them checked out at your vehicle service center.  If your calipers aren't working correctly, it can be a safety hazard.  Sticking calipers can affect your ability to steer and stop; this is the kind of "brake time" you need so you can get them back on track and working properly.

Franklin Auto Service
32725 Franklin Rd
Franklin, MI 48025
248-626-2080
http://www.franklinautoservice.net